One of my longest-running projects is a subway diagram-styled map of Amtrak’s passenger rail network, with the original version dating back to 2010. I always made sure to update it regularly over the years, adding and deleting stations to keep it current. In April last year, I attempted to update the design of the map as well, although I ended up trying a few too many overly-clever things with it –overlaying lines on top of each other just because I was in love with transparency effects being the worst offender. The final result ended up being less than satisfactory, and I shelved the project while I worked on other things.
Coming back with fresh eyes almost a year-and-a-half later, I was able to be ruthlessly objective about what worked and what didn’t in that 2015 draft. The confusing overlaid route lines definitely had to go, but the new typography –using the superb Fira Sans –and larger route designation bullets werehugeimprovements over the original design.From this starting point, I set out with some clear goals for improvement this time around.
First and foremost was more intelligent, harmonious spacing of stations. Previous versions crammed some sections in very tightly, while giving far too much space to other parts of the map. The chief offenders for closely-packed stations have always been the Keystone/Pennsylvanian routes running west out of Philadelphia, all the Michigan Service routes, and the Missouri River Runner between St. Louis and Kansas City –so I paid extra attention to these sections, ensuring that the minimum distance between stops on these sections was the same as that defined elsewhere on the map. For the record, the gap between stations on the Northeast Corridor was used as the “building block” for the rest of the map, and it’s been much more faithfully adhered to in this version of the map.
More intelligent spacing also helped a lot on the west coast. Previously, I’d spaced these stations relatively evenly from Vancouver, BC all the way down to San Diego. Thislooks nice enough in isolation, but it caused the split route lines in the Empire Builder at Spokane to take up way too much space –the three stations on each of these two branches were placed much further apart than any other stations on the entire map. Eastern Washington state is big, but not that big!
In this version, I broke the west coast into a “Pacific Northwest” section from Vancouver down to Eugene-Springfield, and a “California” section from Sacramento all the way down to San Diego. These two sections were spaced as tightly as their Northeast Corridor counterpart on the east coast, with the connecting rural Oregon/California section on the Coast Starlight being more loosely spaced to fill in the resulting gap between the two regions. This improved the spacing and visual size of the Empire Builder branches immensely, possibly the single biggest improvement on the map. I’d always used a similar approach on the City of New Orleans route right from the first version of the map, so doing this actually made the design of the map more consistent.
I also reworked the trajectory of the Southwest Chief on this version. It’s a little twistier than before, but it puts the Colorado stations in a better location relative to Denver, which I think is a spatial improvement.
Keen-eyed readers will have noticed that there’s a new Amtrak service shown on the map –the Winter Park Ski Train that will start running between Denver and the Winter Park ski resort this January! It only hasone return trip each SaturdayandSunday(and on thePresidents Day and MLK Day holidays) through to the end of March, but it’s definitely exciting to add a new line to the map, no matter how short it is! The new purpose-built station at Winter Park will not be served by the daily California Zephyr, which will continue to stop just down the line at Fraser instead.
This version of the map also shows two future Amtrak stations –Hillsborough, North Carolina (opening 2020), and Arcadia Valley, Missouri (potentially opening as early as Fall this year) –as well as the “suspended” section of the Sunset Limited between New Orleans and Orlando. I put this last bit into show that the map is intentionally designed to accommodate it, just in case –by some miracle –it ever gets reinstated. The potential extension of Northeast Regional service to Roanoke is a little further into the future, so it remains off the map for now (although it would be quite easy to add when the time comes).
As usual, your thought and comments are welcome! Printsare now on sale in my online shop from just $27: there’s a version that includes the suspended Sunset Limited track, and another that just shows the current services.
